skip to main content
Idioma:

Dentin-composite bond strength measurement using the Brazilian disk test

Carrera, Carola A ; Chen, Yung-Chung ; Li, Yuping ; Rudney, Joel ; Aparicio, Conrado ; Fok, Alex

Journal of dentistry, 2016-09, Vol.52, p.37-44 [Periódico revisado por pares]

England: Elsevier Ltd

Texto completo disponível

Citações Citado por
  • Título:
    Dentin-composite bond strength measurement using the Brazilian disk test
  • Autor: Carrera, Carola A ; Chen, Yung-Chung ; Li, Yuping ; Rudney, Joel ; Aparicio, Conrado ; Fok, Alex
  • Assuntos: Adhesive ; Adhesives ; Bisphenol A ; Bond strength ; Bonding strength ; Brazil ; Brazilian disk ; Composite Resins ; Debonding ; Dental Bonding ; Dentin ; Dentin-Bonding Agents ; Dentistry ; Disks ; Failure ; Fracture mechanics ; Materials Testing ; Mathematical models ; Microscopy, Electron, Scanning ; Resin Cements ; Resin composite ; Stress, Mechanical ; Studies ; Surface Properties ; Tensile Strength
  • É parte de: Journal of dentistry, 2016-09, Vol.52, p.37-44
  • Notas: ObjectType-Article-1
    SourceType-Scholarly Journals-1
    ObjectType-Feature-2
    content type line 23
  • Descrição: Abstract Objectives This study presents a variant of the Brazilian disk test (BDT) for assessing the bond strength between composite resins and dentin. Methods Dentin-composite disks (ϕ 5 mm × 2 mm) were prepared using either Z100 or Z250 (3M ESPE) in combination with one of three adhesives, Adper Easy Bond (EB), Adper Scotchbond Multi-Purpose (MP) and Adper Single Bond (SB), and tested under diametral compression. Acoustic emission (AE) and digital image correlation (DIC) were used to monitor debonding of the composite from the dentin ring. A finite element (FE) model was created to calculate the bond strengths using the failure loads. Fracture modes were examined by scanning electron microscopy (SEM). Results Most specimens fractured along the dentin-resin composite interface. DIC and AE confirmed interfacial debonding immediately before fracture of the dentin ring. Results showed that the mean bond strength with EB (14.9 ± 1.9 MPa) was significantly higher than with MP (13.2 ± 2.4 MPa) or SB (12.9 ± 3.0 MPa) ( p < 0.05 ); no significant difference was found between MP and SB ( p > 0.05 ). Z100 (14.5 ± 2.3 MPa) showed higher bond strength than Z250 (12.7 ± 2.5 MPa) ( p < 0.05 ). Majority of specimens (91.3%) showed an adhesive failure mode. EB failed mostly at the dentin-adhesive interface, whereas MP at the composite-adhesive interface; specimens with SB failed at the composite-adhesive interface and cohesively in the adhesive. Conclusions The BDT variant showed to be a suitable alternative for measuring the bond strength between dentin and composite, with zero premature failure, reduced variability in the measurements, and consistent failure at the dentin-composite interface. Clinical significance The new test could help to predict the clinical performance of adhesive systems more effectively and consistently by reducing the coefficient of variation in the measured bond strength.
  • Editor: England: Elsevier Ltd
  • Idioma: Inglês;Persa
Links
Voltar para lista de resultados

  • Realização: ABCD-USP USP   Logos de Redes Sociais: Freepik

Buscando em bases de dados remotas. Favor aguardar.