skip to main content
Idioma:

Pitting Corrosion of Zn Peculiarly Caused by Acetate Anions

Abdel-Samad, Hesham S. ; Hassan, Hamdy H.

Zeitschrift für physikalische Chemie (Neue Folge), 2016-10, Vol.230 (10), p.1531-1549 [Periódico revisado por pares]

Munich: De Gruyter Oldenbourg

Texto completo disponível

Citações Citado por
  • Título:
    Pitting Corrosion of Zn Peculiarly Caused by Acetate Anions
  • Autor: Abdel-Samad, Hesham S. ; Hassan, Hamdy H.
  • Assuntos: Acetates ; Aggressive Acetate ; Anodic ; Chronoamperometry ; Corrosion ; Corrosion potential ; EIS ; Electrochemical impedance spectroscopy ; Pitting (corrosion) ; Reduction (electrolytic) ; Zinc ; Zinc Pitting
  • É parte de: Zeitschrift für physikalische Chemie (Neue Folge), 2016-10, Vol.230 (10), p.1531-1549
  • Notas: ObjectType-Article-1
    SourceType-Scholarly Journals-1
    ObjectType-Feature-2
    content type line 23
  • Descrição: The corrosion behaviour of zinc metal was studied in acetate solutions. The potentiodynamic polarization curve in 0.1 M acetate solution displays an anodic peak (A1) owing to the anodic dissolution of zinc followed by a passive layer formation region. Breakdown of the passive film and the initiation of pitting corrosion were observed beyond the pitting potential ( ) and confirmed by SEM images. The reverse scan of the cyclic voltammogram shows three cathodic peaks; CI, CII and CIII. CI was attributed to the reduction of the pitting corrosion product formed at potentials more anodic than , while the overlapped CII and CIII peaks were attributed to the reduction of the exterior and the interior passive layers, respectively. The potentiostatic current time transients at different applied potentials (around the pitting potential) for different electrolyte concentrations involved three stages. The first stage exhibited rapid current decrease with time till a minimum value ( ) at the incubation time ( ). The second and the third stages, where the current increases again linearly with time through two different slopes, are correlated to the pit nucleation and growth, respectively. An increase of the pit nucleation rate and a decrease in its growth were observed with increasing the anodic potential limit ( ). Electrochemical impedance spectroscopy (EIS) measurements, at different potentials before and after were performed. The effect of the acetate concentration was studied as well. A suggested equivalent circuit was used to fit the EIS data. The impedance results confirmed that the thickness of the formed passive layer increases with proceeding of the anodic potential reaching a maximum value at . The passive film thickness decreased again at more anodic potentials.
  • Editor: Munich: De Gruyter Oldenbourg
  • Idioma: Inglês;Alemão
Voltar para lista de resultados

  • Realização: ABCD-USP USP   Logos de Redes Sociais: Freepik

Buscando em bases de dados remotas. Favor aguardar.