skip to main content
Idioma:

Nanoscale zero valent supported by Zeolite and Montmorillonite: Template effect of the removal of lead ion from an aqueous solution

Arancibia-Miranda, Nicolás ; Baltazar, Samuel E. ; García, Alejandra ; Muñoz-Lira, Daniela ; Sepúlveda, Pamela ; Rubio, María A. ; Altbir, Dora

Journal of hazardous materials, 2016-01, Vol.301, p.371-380 [Periódico revisado por pares]

Netherlands: Elsevier B.V

Texto completo disponível

Citações Citado por
  • Título:
    Nanoscale zero valent supported by Zeolite and Montmorillonite: Template effect of the removal of lead ion from an aqueous solution
  • Autor: Arancibia-Miranda, Nicolás ; Baltazar, Samuel E. ; García, Alejandra ; Muñoz-Lira, Daniela ; Sepúlveda, Pamela ; Rubio, María A. ; Altbir, Dora
  • Assuntos: Lead ; Montmorillonite ; Nano zero valent iron ; Sorption ; Zeolite
  • É parte de: Journal of hazardous materials, 2016-01, Vol.301, p.371-380
  • Notas: ObjectType-Article-1
    SourceType-Scholarly Journals-1
    ObjectType-Feature-2
    content type line 23
  • Descrição: •The Z–nZVI and Mt–nZVI composites showed a high efficiency in the removal of Pb2+ present in aqueous solutions.•The fastest removal of Pb2+ was obtained with Mt–nZVI.•The adsorption intensity increased 300 times in the composites, respect to the pristine materials.•The magnetic behavior of the composites reveals a high presence of nZVI particles.•These composites have potential industrial and environmental applications. In this work, we have studied the Pb2+ sorption capacity of Zeolite (Z) and Montmorillonite (Mt) functionalized with nanoscale zero-valent iron (nZVI), at 50% w/w, obtained by means of an impregnating process with a solvent excess. The composites were characterized by several techniques including X-ray diffraction; scanning electron microscopy (SEM); BET area; isoelectric point (IEP); and, finally a magnetic response. Comparatively significant differences in terms of electrophoretic and magnetic characteristics were found between the pristine materials and the composites. Both structures show a high efficiency and velocity in the removal of Pb2+ up to 99.0% (200.0ppm) after 40min of reaction time. The removal kinetics of Pb2+ is adequately described by the pseudo second-order kinetic model, and the maximum adsorbed amounts (qe) of this analyte are in close accordance with the experimental results. The intraparticle diffusion model shows that this is not the only rate-limiting step, this being the Langmuir model which was well adjusted to our experimental data. Therefore, maximum sorption capacities were found to be 115.1±11.0, 105.5±9.0, 68.3±1.3, 54.2±1.3, and 50.3±4.2mgg−1, for Mt–nZVI, Z–nZVI, Zeolite, Mt, and nZVI, respectively. The higher sorption capacities can be attributed to the synergetic behavior between the clay and iron nanoparticles, as a consequence of the clay coating process with nZVI. These results suggest that both composites could be used as an efficient adsorbent for the removal of lead from contaminated water sources.
  • Editor: Netherlands: Elsevier B.V
  • Idioma: Inglês
Links
Voltar para lista de resultados

  • Realização: ABCD-USP USP   Logos de Redes Sociais: Freepik

Buscando em bases de dados remotas. Favor aguardar.