Idioma:

Surface roughness of etched composite resin in light of composite repair

Loomans, B.A.C ; Cardoso, M.V ; Opdam, N.J.M ; Roeters, F.J.M ; De Munck, J ; Huysmans, M.C.D.N.J.M ; Van Meerbeek, B

Journal of dentistry, 2011-07, Vol.39 (7), p.499-505 [Periódico revisado por pares]

Kidlington: Elsevier Ltd

Texto completo disponível

Citações Citado por

Enviar para

Título:
Surface roughness of etched composite resin in light of composite repair
Autor: Loomans, B.A.C ; Cardoso, M.V ; Opdam, N.J.M ; Roeters, F.J.M ; De Munck, J ; Huysmans, M.C.D.N.J.M ; Van Meerbeek, B
Assuntos: Acid Etching, Dental - methods ; Acids ; Analysis of Variance ; Barium Compounds ; Biological and medical sciences ; Bond strength ; Chemical bonds ; Composite resin ; Composite Resins ; Dental Restoration Repair - methods ; Dentistry ; Etching ; Head and neck surgery. Maxillofacial surgery. Dental surgery. Orthodontics ; Hydrofluoric acid ; Materials Testing ; Maxillofacial surgery. Dental surgery. Orthodontics ; Medical sciences ; Methacrylates ; Microscopy, Electron, Scanning ; Nanocomposites ; Nanomaterials ; Nanostructure ; Particle Size ; Phosphoric acid ; Polymers ; Repair ; Resins ; Roughness ; Silicon Dioxide ; Statistics, Nonparametric ; Studies ; Surface Properties ; Surface roughness ; Surgery (general aspects). Transplantations, organ and tissue grafts. Graft diseases ; Technology. Biomaterials. Equipments ; Zirconium
É parte de: Journal of dentistry, 2011-07, Vol.39 (7), p.499-505
Notas: ObjectType-Article-1
SourceType-Scholarly Journals-1
ObjectType-Feature-2
content type line 23
ObjectType-Article-2
ObjectType-Feature-1
Descrição: Abstract Objectives In search for clinically effective composite repair protocols, the effect of various etching protocols on the surface roughness of composite resins with different filler composition were investigated. Methods Of two composite resins (hybrid-filled Clearfil AP-X; nano-filled Filtek Supreme XT) specimens of 3 mm thick with a diameter of 7 mm were prepared ( n = 24). The top surface was polished with 4000-grit SiC-abrasive paper and subjected to one of eight surface treatments: ( n = 3): negative control (NC), 37% phosphoric acid for 20 s (37PA-20 s), 3% hydrofluoric acid for 20 s (3HF-20 s), for 120 s (3HF-120 s), 9.6% hydrofluoric acid for 20 s (9.6HF-20 s), for 120 s (9.6%HF-120 s), 37PA-20 s followed by 9.6%HF for 120 s (37PA-20 s/9.6HF-120 s) and 9.6%HF for 120 s followed by 37PA-20 s (9.6HF-120 s/37PA-20 s). Roughness ( S a ) was measured using a 3D noncontact optical interferometer (WYKO) and surface topography imaged by SEM. Multilevel models were used to estimate the variances within a sample and between samples in each group. Using the resulting overall variances and the means for each group, the eight groups were compared consecutively using t -tests ( p < 0.05). Results The hybrid-filled composite resin demonstrated a significantly rougher surface than the nano-filled ( p < 0.05). For both composites 9.6%HF-120 s, 37PA-20 s/9.6HF-120 s and 9.6%HF-120 s/37PA-20 s resulted in a large increase in roughness compared to the other groups ( p < 0.05). For the hybrid-filled, the succeeding groups (37PA-20 s, 3HF-20 s, 3HF-120 s and 9.6HF-20 s) resulted in a statistically significant increase in surface roughness ( p < 0.02). For the nano-filled only a statistically significant increase in roughness was found between 3HF-20 s and 3HF-120 s ( p < 0.001) and between 9.6HF-20 s and 9.6HF-120 s ( p < 0.001). SEM surface characterization revealed that the hybrid-filled composite resin was much more affected by etching than the nano-filled. Significance Composite resins should not be seen as a group of materials having identical properties when it comes to repair. The effect of etching will depend on the composition of the filler particles.
Editor: Kidlington: Elsevier Ltd
Idioma: Inglês;Persa

Links

Voltar para lista de resultados

Realização: Logos de Redes Sociais:

Surface roughness of etched composite resin in light of composite repair

Loomans, B.A.C ; Cardoso, M.V ; Opdam, N.J.M ; Roeters, F.J.M ; De Munck, J ; Huysmans, M.C.D.N.J.M ; Van Meerbeek, B

Kidlington: Elsevier Ltd

Buscando em bases de dados remotas. Favor aguardar.