Idioma:

Ultra-translucent zirconia processing and aging effect on microstructural, optical, and mechanical properties

de Araújo-Júnior, Everardo N.S. ; Bergamo, Edmara T.P. ; Bastos, Tiago M.C. ; Benalcázar Jalkh, Ernesto B. ; Lopes, Adolfo C.O. ; Monteiro, Kelli N. ; Cesar, Paulo F. ; Tognolo, Fernanda C. ; Migliati, Rafael ; Tanaka, Ricardo ; Bonfante, Estevam A.

Dental materials, 2022-04, Vol.38 (4), p.587-600 [Periódico revisado por pares]

England: Elsevier Inc

Texto completo disponível

Citações Citado por

Enviar para

Título:
Ultra-translucent zirconia processing and aging effect on microstructural, optical, and mechanical properties
Autor: de Araújo-Júnior, Everardo N.S. ; Bergamo, Edmara T.P. ; Bastos, Tiago M.C. ; Benalcázar Jalkh, Ernesto B. ; Lopes, Adolfo C.O. ; Monteiro, Kelli N. ; Cesar, Paulo F. ; Tognolo, Fernanda C. ; Migliati, Rafael ; Tanaka, Ricardo ; Bonfante, Estevam A.
Assuntos: Aging ; Aging methods ; Ceramics ; Crystal structure ; Crystallinity ; Dental Materials ; Diamond pyramid hardness ; Evaluation ; Flexural strength ; Fracture toughness ; Hardness ; Isostatic pressing ; Materials Testing ; Mechanical properties ; Microstructure ; Optical properties ; Partial stabilization ; Partially stabilized zirconia ; Powders ; Prostheses ; Prosthetics ; Reactors ; Reproducibility of Results ; Scanning electron microscopy ; Sintering (powder metallurgy) ; Surface Properties ; X-ray diffraction ; Yttrium ; Yttrium oxide ; Zirconia ; Zirconium ; Zirconium dioxide
É parte de: Dental materials, 2022-04, Vol.38 (4), p.587-600
Notas: ObjectType-Article-2
SourceType-Scholarly Journals-1
ObjectType-Feature-3
content type line 23
ObjectType-Review-1
Descrição: [Display omitted] To evaluate the effect of the ceramic processing and aging method on the microstructure, optical, and mechanical properties of a third generation ultra-translucent zirconia, yttria partially stabilized zirconia (5Y-PSZ). In-house discs were obtained through uniaxial and isostatic pressing an ultra-translucent Y-PSZ powder and sintering at 1450 °C for 2 h. As control, a commercial disc was milled from pre-sintered blocks fabricated with the same 5Y-PSZ powder through isostatic pressing and sintered under the same protocol. Discs were allocated into three groups according to aging condition as immediate (non-aged) and aged using autoclave or hydrothermal reactor at 134ºC for 20 h at 2.2 bar. Crystalline content and microstructure were evaluated using X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. Optical properties were determined using reflectance data to calculate the contrast ratio (CR) and translucency parameter (TP). Mechanical properties were assessed by Vickers hardness, fracture toughness and biaxial flexural strength tests. XRD spectra revealed a prevalence of cubic (70%) and tetragonal (30%) phases, and the SEM images showed a dense fully crystalline ceramic matrix for both materials. Crystalline content and microstructure of the in-house and commercial 5Y-PSZs were not affected by aging. As-sintered 5Y-PSZs demonstrated similar CR (~0.6) and TP (~18) values, as well as Vickers hardness (~14 GPa) and fracture toughness (~3.8 Mpa.m1/2), with no significant alteration after both aging methods. In-house and commercial Y-PSZs Weibull moduli ranged from 3.0 to 5.3. 5Y-PSZ processing methods resulted in similar characteristic strength after sintering (592–618 Mpa). While commercial 5Y-PSZ showed no significant influence of aging on strength, hydrothermal reactor aging significantly decreased the in-house Y-PSZ characteristic strength (474 Mpa). Both 5Y-PSZs demonstrated high reliability up to 300-Mpa strength missions, with no detrimental effect of aging (88–100%). Irrespective of the processing method, ultra-translucent 5Y-PSZ showed high aging resistance and translucency stability, as well as strength corresponding to the indication up to short-span anterior prostheses.
Editor: England: Elsevier Inc
Idioma: Inglês

Links

View this record in MEDLINE/PubMed

Voltar para lista de resultados

Realização: Logos de Redes Sociais:

Ultra-translucent zirconia processing and aging effect on microstructural, optical, and mechanical properties

de Araújo-Júnior, Everardo N.S. ; Bergamo, Edmara T.P. ; Bastos, Tiago M.C. ; Benalcázar Jalkh, Ernesto B. ; Lopes, Adolfo C.O. ; Monteiro, Kelli N. ; Cesar, Paulo F. ; Tognolo, Fernanda C. ; Migliati, Rafael ; Tanaka, Ricardo ; Bonfante, Estevam A.

England: Elsevier Inc

Buscando em bases de dados remotas. Favor aguardar.