skip to main content
Idioma:

Strength and reliability of zirconia fabricated by additive manufacturing technology

Zenthöfer, Andreas ; Schwindling, Franz Sebastian ; Schmitt, Clemens ; Ilani, Ali ; Zehender, Nathalie ; Rammelsberg, Peter ; Rues, Stefan

Dental materials, 2022-10, Vol.38 (10), p.1565-1574 [Periódico revisado por pares]

Amsterdam: Elsevier Inc

Texto completo disponível

Citações Citado por
  • Título:
    Strength and reliability of zirconia fabricated by additive manufacturing technology
  • Autor: Zenthöfer, Andreas ; Schwindling, Franz Sebastian ; Schmitt, Clemens ; Ilani, Ali ; Zehender, Nathalie ; Rammelsberg, Peter ; Rues, Stefan
  • Assuntos: 3D printing ; Biaxial flexural strength ; Color infiltration ; Conditioning ; Cylindrical milling ; Diamond polishing ; Diamonds ; Flexural strength ; Infiltration ; Optimization ; Partial sintering ; Polycrystals ; Sintering ; Subgroups ; Tetragonal zirconia ; Tetragonal zirconia polycrystals ; Three dimensional printing ; Variance analysis ; Yttria-stabilized zirconia ; Yttrium oxide ; Zirconia
  • É parte de: Dental materials, 2022-10, Vol.38 (10), p.1565-1574
  • Notas: ObjectType-Article-1
    SourceType-Scholarly Journals-1
    ObjectType-Feature-2
    content type line 23
  • Descrição: To test strength and reliability of 3D printed compared to milled zirconia. Cylindrical specimens were fabricated from milled (group G1; e.max ZirCAD LT) and from 3D printed (group G2; LithaCon 3Y 230) 3-mol% yttria-stabilized tetragonal zirconia polycrystal (3Y-TZP). While G1 and G2 were sintered in one step, a further series (G3) of 3D printed 3Y-TZP was sintered in two steps including intermediate color infiltration. In each group, two different conditioning strategies were applied (n ≥ 20 samples/subgroup): (1) final polishing with #1200 diamond discs according to ISO 6872, and (2) final polishing with #220 diamond discs resulting in imperfectly polished surfaces. All samples were tested to fracture with a universal testing device (cross-head speed: 1 mm/min). Characteristic strengths and Weibull moduli were calculated. Effects were analyzed by means of either ANOVA (homocedastic data) or Welch ANOVA (heterocedastic data). For samples conditioned according to ISO 6872, mean flexural strengths were 1462 ± 105 MPa (G1), 1369 ± 280 MPa (G2), and 1197 ± 317 MPa (G3). For the imperfectly polished subgroups, strength values were 1461 ± 121 MPa (G1), 1349 ± 332 MPa (G2), and 1271 ± 272 MPa (G3). Although all groups showed high mean strength values, the reliability of milled zirconia (Weibull moduli 14 < m <16) outperformed that of the 3D-printed material (3 < m <6). Even after color infiltration in a partially sintered state, the tested 3D printed zirconia exceeded the ISO flexural strength criteria for all types of fixed ceramic restorations by far (800 MPa for class 6, ISO 6872), indicating its high potential for clinical use. Further optimization of the internal material structure after sintering might improve the reliability of 3D printed zirconia which is currently inferior to that of milled zirconia.
  • Editor: Amsterdam: Elsevier Inc
  • Idioma: Inglês
Voltar para lista de resultados

  • Realização: ABCD-USP USP   Logos de Redes Sociais: Freepik

Buscando em bases de dados remotas. Favor aguardar.