Idioma:

Bis(4-methyl phenyl)iodonium as an alternative component to diphenyliodonium in camphorquinone-based ternary initiating systems

Verzola, Karina C. ; Dressano, Diogo ; Saraceni, Cintia Helena Coury ; Gonçalves, Luciano Souza ; Hadis, Mohammed ; Watts, David C. ; Palin, William M. ; Lima, Adriano Fonseca

Dental materials, 2020-10, Vol.36 (10), p.1282-1288 [Periódico revisado por pares]

England: Elsevier Inc

Texto completo disponível

Citações Citado por

Enviar para

Título:
Bis(4-methyl phenyl)iodonium as an alternative component to diphenyliodonium in camphorquinone-based ternary initiating systems
Autor: Verzola, Karina C. ; Dressano, Diogo ; Saraceni, Cintia Helena Coury ; Gonçalves, Luciano Souza ; Hadis, Mohammed ; Watts, David C. ; Palin, William M. ; Lima, Adriano Fonseca
Assuntos: Biphenyl Compounds ; Bisphenol A glycidyl methacrylate ; Camphor - analogs & derivatives ; Composite Resins ; Conversion ; Dental restorative materials ; Dentistry ; Flexural strength ; FTIR spectrometers ; Irradiance ; Irradiation ; Light irradiation ; Light transmission ; Materials Testing ; Mechanical properties ; Methacrylates ; Modulus of rupture in bending ; Onium Compounds ; Photo-cure ; Polyethylene Glycols ; Polymerisation ; Polymerization ; Polymers ; Polymethacrylic Acids ; Post-irradiation ; Real time ; Resin composite ; Resins ; Salts ; Shrinkage ; Strain rate ; Systems analysis ; Ternary photoinitiator ; Triethylene glycol dimethacrylate ; Variance analysis
É parte de: Dental materials, 2020-10, Vol.36 (10), p.1282-1288
Notas: ObjectType-Article-1
SourceType-Scholarly Journals-1
ObjectType-Feature-2
content type line 23
Descrição: •BPI can be used in ternary activation systems substituting DPI salt.•Use of iodonium salts increase the polymerization shrinkage of resins.•Ternary systems containing BPI improve the flexural strength and modulus of resins. To evaluate the influence of different co-initiators (diphenyliodonium hexafluorophosphate - DPI - and bis(4-methyl phenyl)iodonium hexafluorophosphate – BPI) on chemical and mechanical properties of resins. Nine experimental resins (50% Bis-GMA and 50% TEGDMA, w/w) with 60 wt% filler particles were formulated. The initiating system used was camphorquinone (CQ-1 mol%) and ethyl dimethylaminobenzoate (EDAB-2 mol%). Experimental groups were established according to DPI and BPI quantities (0.25, 0.5, 0.75, and 1 mol%). The control group was a resin containing only CQ-EDAB. Light transmission through the resin during polymerisation was analysed with a UV–vis spectrophotometer. Real-time polymerisation of the systems was evaluated using an FTIR spectrometer. Real-time polymerisation shrinkage strain was evaluated, and the flexural strength and modulus of materials were obtained by 3-point bending. Experimental groups were statistically analysed by Analysis of Variance and Tukey’s test (α = 0.05). Dunnett’s test was applied to compare experimental groups with control. Light transmission rapidly increased initially for resins containing DPI or BPI. After 30 s cure, the irradiance on the lower surface of resin specimens was similar for all groups. After 10 s of light irradiation, groups containing DPI and BPI had higher conversion than the control. However, conversion after 120 s post-irradiation was similar for all groups. The rate of polymerisation, shrinkage strain, and the maximum strain rate were higher for groups containing DPI/BPI. The use of iodonium salts increased the flexural strength and flexural moduli of resins. DPI and BPI increased resin reactivity similarly. Increased rate of polymerization influenced light transmission through the resin in the first seconds of polymerisation and increased resin shrinkage and rate of shrinkage, as well as flexural strength and moduli.
Editor: England: Elsevier Inc
Idioma: Inglês

Links

View this record in MEDLINE/PubMed

Voltar para lista de resultados

Realização: Logos de Redes Sociais:

Bis(4-methyl phenyl)iodonium as an alternative component to diphenyliodonium in camphorquinone-based ternary initiating systems

Verzola, Karina C. ; Dressano, Diogo ; Saraceni, Cintia Helena Coury ; Gonçalves, Luciano Souza ; Hadis, Mohammed ; Watts, David C. ; Palin, William M. ; Lima, Adriano Fonseca

England: Elsevier Inc

Buscando em bases de dados remotas. Favor aguardar.