skip to main content
Visitante
Meu Espaço
Minha Conta
Sair
Identificação
This feature requires javascript
Tags
Revistas Eletrônicas (eJournals)
Livros Eletrônicos (eBooks)
Bases de Dados
Bibliotecas USP
Ajuda
Ajuda
Idioma:
Inglês
Espanhol
Português
This feature required javascript
This feature requires javascript
Primo Search
Busca Geral
Busca Geral
Acervo Físico
Acervo Físico
Produção Intelectual da USP
Produção USP
Search For:
Clear Search Box
Search in:
Busca Geral
Or hit Enter to replace search target
Or select another collection:
Search in:
Busca Geral
Busca Avançada
Busca por Índices
This feature requires javascript
This feature requires javascript
Extrusion-based Additive Manufacturing of Magnetic Heat Exchange Structures for Caloric Applications
Sharma, Vaibhav
VCU Scholars Compass 2024
Texto completo disponível
Citações
Citado por
Exibir Online
Detalhes
Resenhas & Tags
Mais Opções
Nº de Citações
This feature requires javascript
Enviar para
Adicionar ao Meu Espaço
Remover do Meu Espaço
E-mail (máximo 30 registros por vez)
Imprimir
Link permanente
Referência
EasyBib
EndNote
RefWorks
del.icio.us
Exportar RIS
Exportar BibTeX
This feature requires javascript
Título:
Extrusion-based Additive Manufacturing of Magnetic Heat Exchange Structures for Caloric Applications
Autor:
Sharma, Vaibhav
Assuntos:
Additive Manufacturing
;
Chemical Engineering
;
Engineering
Science
and
Materials
;
Extrusion
;
Magnetic Properties
;
Magnetocaloric
;
Materials
Characterization
;
Materials
Science
and Engineering
;
Mechanical Engineering
;
Powders
Notas:
Theses and Dissertations
https://scholarscompass.vcu.edu/context/etd/article/8806/viewcontent/Sharma_Vaibhav_Ph.D..pdf
https://scholarscompass.vcu.edu/etd/7613
Descrição:
Currently, the commercial building sector accounts for 18% of total U.S. end-use energy consumption, of which almost a third was from on-site combustion of fossil fuels for space and water heating. Magnetic heat pumping (MHP) technology is an energy-efficient, sustainable, environmentally-friendly alternative to conventional vapor-compression cooling technology. Several MHP designs today are predicted to be highly energy efficient, on condition that suitable working materials can be developed. This materials challenge has proven to be daunting due to issues associated with intricate synthesis/post-processing protocols and complications related to shaping the mostly brittle magnetocaloric alloys into thin-walled channeled regenerator structures to facilitate efficient heat transfer between the solid refrigerant and the heat exchange fluid in an active magnetic regenerator (AMR) cooling device. To address this challenge, this study is focused on a novel low-temperature extrusion-based additive manufacturing (AM) method to 3D print microchanneled magnetocaloric structures. The printing ink consists of magnetocaloric powders, a polymer binder, and multiple solvents to achieve desirable shear-thinning property, which is critical for a robust printing process. Acting as a sacrificial binding agent for the magnetic powders, the polymer binder holds the 3D printed structures in place and is subsequently removed using a two-step heat-treatment process. Both fundamental and applied aspects of the manufacturing process are being addressed, including precursor powder development, 3D printing process development and post heat treatment analysis of the additively manufactured part. Overall, research efforts pertaining to AM process development using three precursor magnetocaloric powders will be discussed - (1) La0.6Ca0.4MnO3 powders prepared by a patented modified Pechini sol-gel wet chemical method, (2) AlFe2B2 powders manufactured by a unique molten salt sintering method, and (3) La(Fe,Si)13 powders produced via gas-atomization. The effect of various process parameters, such as powder-binder ratio, the viscosity of printing ink, powder size, shape and internal porosity etc., on the geometrical and mechanical characteristics of green parts will be described. Furthermore, the effects of precursor powder characteristics (morphology, particle size distribution, porosity, etc.), as well as sintering and printing parameters on the quality of the densified magnetocaloric structures, will be deliberated upon. Finally, the feasibility of 3D printing magnetocaloric structures with spatially designed microchannels of minimum dimensions of 150 µm will be demonstrated. Overall, this study provides strategies for realizing low-cost functionally graded magnetic regenerators, thus potentially eliminating one of the main barriers to the commercialization of magnetic cooling technology. Despite the success achieved in this Dissertation, many open questions regarding the additive manufacturing of 3D-printed magnetocaloric structures persist. The concluding chapter of this Dissertation provides recommendations for future experiments that may be conducted to develop advanced magnetocaloric structures with compositionally graded anisotropic properties and enhanced mechanical and chemical stability.
Editor:
VCU Scholars Compass
Data de criação/publicação:
2024
Idioma:
Inglês
Links
View record in Virginia Commonwealth University$$FView record in $$GVirginia Commonwealth University
This feature requires javascript
This feature requires javascript
Voltar para lista de resultados
Resultado
1
Avançar
This feature requires javascript
This feature requires javascript
Buscando em bases de dados remotas. Favor aguardar.
Buscando por
em
scope:(USP_VIDEOS),scope:("PRIMO"),scope:(USP_FISICO),scope:(USP_EREVISTAS),scope:(USP),scope:(USP_EBOOKS),scope:(USP_PRODUCAO),primo_central_multiple_fe
Mostrar o que foi encontrado até o momento
This feature requires javascript
This feature requires javascript