skip to main content
Idioma:
Tipo de recurso Mostra resultados com: Mostra resultados com: Índice

Crazing Mechanism and Physical Aging of Poly(lactide) Toughened with Poly(ethylene oxide)-block-poly(butylene oxide) Diblock Copolymers

McCutcheon, Charles J ; Zhao, Boran ; Jin, Kailong ; Bates, Frank S ; Ellison, Christopher J

Macromolecules, 2020-11, Vol.53 (22), p.10163-10178 [Periódico revisado por pares]

American Chemical Society

Texto completo disponível

Citações Citado por
  • Título:
    Crazing Mechanism and Physical Aging of Poly(lactide) Toughened with Poly(ethylene oxide)-block-poly(butylene oxide) Diblock Copolymers
  • Autor: McCutcheon, Charles J ; Zhao, Boran ; Jin, Kailong ; Bates, Frank S ; Ellison, Christopher J
  • É parte de: Macromolecules, 2020-11, Vol.53 (22), p.10163-10178
  • Descrição: Sustainable polymers are important alternatives to plastics and elastomers derived from petroleum resources. Poly­(lactide) (PLA), a commercially available sustainable plastic, is a well-known success story. However, PLA lacks ductility and toughness, limiting the number of potential uses. In this study, small amounts of a liquid poly­(ethylene oxide)-block-poly­(butylene oxide) (PEO-PBO) diblock copolymer additive were blended with PLA to enhance its toughness and ductility. The incorporated PEO-PBO diblock copolymers generated a macrophase-separated morphology with particle diameters of 0.2–0.9 μm, and nearly matched refractive indices of PLA and PEO-PBO led to retention of optical transparency. Addition of just 1.8 wt % PEO-PBO into PLA led to a 20-fold increase in toughness, measured as the area under the stress–strain data in tension without affecting the bulk elastic modulus of the plastic. The micromechanical deformation process of the PEO-PBO/PLA blend was investigated via in situ small angle X-ray scattering during tensile testing. The total volume of the crazed material was proportional to the total surface area of the dispersed PEO-PBO particles, and both quantities increased with increasing PEO-PBO loading. Increasing the PEO-PBO loading also resulted in (A) an increase in particle size, causing a decrease in the craze initiation stress, and (B) an increase in fibril spacing, indicating a lower craze propagation stress. Furthermore, craze development was found to be independent of aging time. As a result, the PEO-PBO/PLA blend was able to remain ductile and tough for up to 114 days, exhibiting a 10-fold increase in elongation at break and toughness compared to neat PLA, which becomes brittle in less than 2 days. These results demonstrate that designing additives that promote deformation by crazing is an effective way to overcome the aging-induced embrittlement of glassy polymers.
  • Editor: American Chemical Society
  • Idioma: Inglês
Voltar para lista de resultados

  • Realização: ABCD-USP USP   Logos de Redes Sociais: Freepik

Buscando em bases de dados remotas. Favor aguardar.