skip to main content
Idioma:
Primo Search
Clear Search Box
Search in: Busca Geral
Busca Avançada
Busca por Índices

The Effect of High Density Polyethylene Additives on the Mix Design Parameters of Asphalt Mixtures

Sajad Abdollahi ; , Gholam Hossein Hamedi ; Babak Golchin ; Ramin Meshkabadi

پژوهش‌های زیرساخت‌های عمرانی, 2022-02, Vol.7 (2), p.61-75 [Periódico revisado por pares]

University of Qom

Texto completo disponível

Citações Citado por
  • Título:
    The Effect of High Density Polyethylene Additives on the Mix Design Parameters of Asphalt Mixtures
  • Autor: Sajad Abdollahi ; , Gholam Hossein Hamedi ; Babak Golchin ; Ramin Meshkabadi
  • Assuntos: analysis of variance ; high density polyethylene ; mixing design ; optimization
  • É parte de: پژوهش‌های زیرساخت‌های عمرانی, 2022-02, Vol.7 (2), p.61-75
  • Descrição: In previous studies, the effect of different types of polyethylene on the performance of asphalt mixtures has been investigated. In this research, the mixing design of asphalt mixtures containing high density polyethylene has been analyzed and modeled based on the conventional and the response surface methods for limestone and granite aggregates. For this purpose, the volumetric and strength behavior of laboratory-made samples have been measured and statistically analyzed. In the optimization process, the optimal amount of binder and polyethylene has been extracted according to the criteria of the asphalt pavement regulations for Iranian roads and with the desirability approach. Experimental results show that the optimal conditions for limestone aggregate are 6.1% binder and 4% polyethylene with a desirability of 0.909. However, these values for granite aggregate are 5.9% binder, 4% polyethylene with a desirability of 0.962. The polyethylene additive increases the Marshall Strength and specific weight of the samples for both materials. The higher percentage of additive has the greater effect on these parameters. Analysis of variance shows that polyethylene percentage has a significant effect on Marshall Flow. By increasing the amount of additive from zero to four percent, the flow value decreases.
  • Editor: University of Qom
  • Idioma: Persa
Links
Voltar para lista de resultados

  • Realização: ABCD-USP USP   Logos de Redes Sociais: Freepik

Buscando em bases de dados remotas. Favor aguardar.