Idioma:

Effect of Organic Loading Rate and Fill Time on the Biohydrogen Production in a Mechanically Stirred AnSBBR Treating Synthetic Sucrose-Based Wastewater

Inoue, R. K ; Lima, D. M. F ; Rodrigues, J. A. D ; Ratusznei, S. M ; Zaiat, M

Applied biochemistry and biotechnology, 2014-11, Vol.174 (6), p.2326-2349 [Periódico revisado por pares]

Boston: Springer-Verlag

Texto completo disponível

Citações Citado por

Enviar para

Título:
Effect of Organic Loading Rate and Fill Time on the Biohydrogen Production in a Mechanically Stirred AnSBBR Treating Synthetic Sucrose-Based Wastewater
Autor: Inoue, R. K ; Lima, D. M. F ; Rodrigues, J. A. D ; Ratusznei, S. M ; Zaiat, M
Assuntos: acetic acid ; Biochemistry ; biofilm ; Biofilms ; biohydrogen ; Biological and medical sciences ; bioreactors ; Bioreactors - microbiology ; Biotechnology ; chemical oxygen demand ; Chemical synthesis ; Chemistry ; Chemistry and Materials Science ; ethanol ; Fundamental and applied biological sciences. Psychology ; Hydrogen ; Hydrogen - metabolism ; hydrogen production ; Kinetics ; Mechanical Phenomena ; Mechanical properties ; Organic Chemicals - metabolism ; Organic chemistry ; sucrose ; Sucrose - analysis ; Waste materials ; Waste Water - chemistry ; Waste Water - microbiology ; wastewater ; Water resources management
É parte de: Applied biochemistry and biotechnology, 2014-11, Vol.174 (6), p.2326-2349
Notas: http://dx.doi.org/10.1007/s12010-014-1205-7
ObjectType-Article-1
SourceType-Scholarly Journals-1
ObjectType-Feature-2
content type line 23
Descrição: This study investigated the feasibility to produce biohydrogen of a mechanically stirred anaerobic sequencing batch biofilm reactor (AnSBBR) treating sucrose-based synthetic wastewater. The bioreactor performance (30 °C) was evaluated as to the combined effect of fill time (2, 1.5, and 1 h), cycle length (4, 3, and 2 h), influent concentration (3,500 and 5,250 mg chemical oxygen demand (COD) L⁻¹) and applied volumetric organic load (AVOLCT from 9.0 to 27.0 g COD L⁻¹ d⁻¹). AVOLs were varied according to influent concentration and cycle length (t C). The results showed that increasing AVOLCT resulted in a decrease in sucrose removal from 99 to 86 % and in improvement of molar yield per removed load (MYRLS.ₙ) from 1.02 mol H₂ mol carbohydrate⁻¹ at AVOLCT of 9.0 g COD L⁻¹ d⁻¹ to maximum value of 1.48 mol H₂ mol carbohydrate⁻¹, at AVOLCT of 18.0 g COD L⁻¹ d⁻¹, with subsequent decrease. Increasing AVOLCT improved the daily molar productivity of hydrogen (MPr) from 15.28 to 49.22 mol H₂ m⁻³ d⁻¹. The highest daily specific molar productivity of hydrogen (SMPr) obtained was 8.71 mol H₂ kg TVS⁻¹ d⁻¹ at an AVOLCT of 18.0 g COD L⁻¹ d⁻¹. Decreasing t C from 4 to 3 h decreased sucrose removal, increased MPr, and improved SMPr. Increasing influent concentration decreased sucrose removal only at t C of 2 h, improved MYRLS,ₙ and MPr at all t C, and also improved SMPr at t C of 4 and 3 h. Feeding strategy had a significant effect on biohydrogen production; increasing fill time improved sucrose removal, MPr, SMPr, and MYRLS,ₙ for all investigated AVOLCT. At all operational conditions, the main intermediate metabolic was acetic acid followed by ethanol, butyric, and propionic acids. Increasing fill time resulted in a decrease in ethanol concentration.
Editor: Boston: Springer-Verlag
Idioma: Inglês

Links

Voltar para lista de resultados

Anterior Resultado 8 Avançar Ir para próxima página

Realização: Logos de Redes Sociais:

Effect of Organic Loading Rate and Fill Time on the Biohydrogen Production in a Mechanically Stirred AnSBBR Treating Synthetic Sucrose-Based Wastewater

Inoue, R. K ; Lima, D. M. F ; Rodrigues, J. A. D ; Ratusznei, S. M ; Zaiat, M

Boston: Springer-Verlag

Buscando em bases de dados remotas. Favor aguardar.