skip to main content
Idioma:

10.8% Efficiency Polymer Solar Cells Based on PTB7-Th and PC71BM via Binary Solvent Additives Treatment

Wan, Qun ; Guo, Xia ; Wang, Zaiyu ; Li, Wanbin ; Guo, Bing ; Ma, Wei ; Zhang, Maojie ; Li, Yongfang

Advanced functional materials, 2016-09, Vol.26 (36), p.6635-6640 [Periódico revisado por pares]

Blackwell Publishing Ltd

Texto completo disponível

Citações Citado por
  • Título:
    10.8% Efficiency Polymer Solar Cells Based on PTB7-Th and PC71BM via Binary Solvent Additives Treatment
  • Autor: Wan, Qun ; Guo, Xia ; Wang, Zaiyu ; Li, Wanbin ; Guo, Bing ; Ma, Wei ; Zhang, Maojie ; Li, Yongfang
  • Assuntos: binary solvent additives ; morphology ; polymer solar cells ; power conversion efficiency
  • É parte de: Advanced functional materials, 2016-09, Vol.26 (36), p.6635-6640
  • Notas: Jiangsu Provincial Natural Science Foundation - No. BK20150332
    National Natural Science Foundation of China - No. 51203168; No. 91333204; No. 51422306; No. 51503135; No. 51573120
    ArticleID:ADFM201602181
    Natural Science Foundation of the Jiangsu Higher Education Institutions of China - No. 15KJB430027
    ark:/67375/WNG-FW9ZM6K0-V
    Priority Academic Program Development of Jiangsu Higher Education Institutions
    istex:13A57753FBE514ED81B5F8BA3E557B273310106A
    Director, Office of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy - No. DE-AC02-05CH11231
  • Descrição: In this work, polymer solar cells are fabricated based on the blend of PTB7‐Th: PC71BM by using a mixed solvent additive of 1,8‐diiodooctane and N‐methyl pyrrolidone to optimize the morphology of the blend. A high power conversion efficiency (PCE) of 10.8% has been achieved with a simple conventional device. In order to deeply investigate the influence of the mixed solvent additives on the morphology and device performance, the variations of the molecular packing and bulk morphology of the blend film cast from ortho‐dichlorobenzene with single or binary solvent additives are measured. Although all the blend films exhibit similar domain size and nanoscale phase separation, the blend film processed with mixed solvent additive shows the highest domain purity, resulting in the least bimolecular recombination, relatively high Jsc and FF, and hence enhanced PCE. Therefore, the best photovoltaic performance with the Voc of 0.82 V, Jsc of 19.1 mA cm−2, FF of 69.1%, and PCE of 10.8% are obtained for the device based on the blend with binary solvent additive treatment. For the PTB7‐Th:PC71BM blend system, the binary solvent additives of 1,8‐diiodooctane and N‐methyl pyrrolidone are used to enhance the domain purity, so that a power conversion efficiency of 10.8% is achieved with the conventional device structure, which is much higher than that of the devices without or with single solvent additive treatment.
  • Editor: Blackwell Publishing Ltd
  • Idioma: Inglês
Voltar para lista de resultados

  • Realização: ABCD-USP USP   Logos de Redes Sociais: Freepik

Buscando em bases de dados remotas. Favor aguardar.