skip to main content
Visitante
Meu Espaço
Minha Conta
Sair
Identificação
This feature requires javascript
Tags
Revistas Eletrônicas (eJournals)
Livros Eletrônicos (eBooks)
Bases de Dados
Bibliotecas USP
Ajuda
Ajuda
Idioma:
Inglês
Espanhol
Português
This feature required javascript
This feature requires javascript
Primo Search
Busca Geral
Busca Geral
Acervo Físico
Acervo Físico
Produção Intelectual da USP
Produção USP
Search For:
Clear Search Box
Search in:
Busca Geral
Or hit Enter to replace search target
Or select another collection:
Search in:
Busca Geral
Busca Avançada
Busca por Índices
This feature requires javascript
Tipo de recurso
criteria input
qualquer lugar do registro
no título
como autor
no assunto
Data de publicação
lsr01
lsr02
lsr03
lsr04
Orientador
Show Results with:
no título
Show Results with:
qualquer lugar do registro
no título
como autor
no assunto
Data de publicação
lsr01
lsr02
lsr03
lsr04
Orientador
Mostra resultados com:
criteria input
que contêm minhas palavras de busca
com a frase exata
começa com
Mostra resultados com:
Índice
criteria input
E
OU
NÃO
This feature requires javascript
Cement space of all-ceramic crowns
Piras, Fernanda Furtado
Biblioteca Digital de Teses e Dissertações da USP; Universidade de São Paulo; Faculdade de Odontologia de Bauru 2019-03-15
Acesso online. A biblioteca também possui exemplares impressos.
Exibir Online
Localização & Reservas
Detalhes
Resenhas & Tags
Solicitações
Mais Opções
Prateleira Virtual
This feature requires javascript
Enviar para
Adicionar ao Meu Espaço
Remover do Meu Espaço
E-mail (máximo 30 registros por vez)
Imprimir
Link permanente
Referência
EasyBib
EndNote
RefWorks
del.icio.us
Exportar RIS
Exportar BibTeX
This feature requires javascript
Título:
Cement space of all-ceramic crowns
Autor:
Piras, Fernanda Furtado
Orientador:
Rubo, Jose Henrique
Assuntos:
Adaptação
;
Cerâmicas
;
Microtomografia Por Raio-X
;
Silicona
;
3d Imaging
;
Cad/Cam
;
Internal Fit
;
Marginal Adaptation
;
Replica Technique
Notas:
Tese (Doutorado)
Descrição:
A ceramic systems ability to provide a restoration well adapted and fulfilling the patients clinical and esthetic requirements is its most important technical feature. A CAD / CAM machine unit must be able of designing and milling different restorative materials, such as: resin-matrix ceramics, polycrystalline ceramics and glass-matrix ceramics. The purpose of this study was to present two articles that evaluated weather or not the milling strategy of different all-ceramic crown materials has an influence on the final cementation space. Specifically, the two articles evaluated: article I - The cementation space assessed by the most commonly used method- silicone replica technique- correlating stereomicroscope analysis with micromotomography (-CT); article II: The two-dimensional measures of cementation space were correlated with volume values by using -CT analysis, to better understand the behavior of 2D values in a tridimensional view. In both articles, single crowns were milled in lithium-disilicate, resin nanoceramic and zirconia. In article I, one hundred twenty measurements of each material were used to correlate the methodologies: stereomiscrocope and -CT. The Pearson correlation coefficient test showed a correlation between the methods (p= 0.000, r=+0.455). A similarity in the pattern of statistically significant differences among the regions evaluated (axial, occlusal, marginal) for both methodologies seems to exist. The positive correlation between the methods of measurements of cement space suggests that the internal dimensions of the materials varied because the different strategies after milled of them. In article II, twenty-eight slices were evaluated in three regions: marginal, axial and occlusal, totaling eighty-four measurements for each specimen. Axial and Marginal region showed positive correlation (p=0.000, r=+0.656; p=0.000, r=+0.677, respectively), while occlusal space presented negative correlation (p=0.003, r=0.526). The correlation between 2D and volumetric analysis allow to achieving as more information as possible to improve CAD/CAM systems.
DOI:
10.11606/T.25.2019.tde-28082019-172322
Editor:
Biblioteca Digital de Teses e Dissertações da USP; Universidade de São Paulo; Faculdade de Odontologia de Bauru
Data de criação/publicação:
2019-03-15
Formato:
Adobe PDF
Idioma:
Inglês
Links
Este item no Dedalus
Teses e Dissertações USP
This feature requires javascript
This feature requires javascript
Voltar para lista de resultados
Anterior
Resultado
5
Avançar
This feature requires javascript
This feature requires javascript
Buscando em bases de dados remotas. Favor aguardar.
Buscando por
em
scope:(USP_VIDEOS),scope:("PRIMO"),scope:(USP_FISICO),scope:(USP_EREVISTAS),scope:(USP),scope:(USP_EBOOKS),scope:(USP_PRODUCAO),primo_central_multiple_fe
Mostrar o que foi encontrado até o momento
This feature requires javascript
This feature requires javascript